Tilbud
Bestselgere
Klarna
Utvalgte produkter
Janome Memory Craft 11000 Special Edition med Digitizer MBX v.4
56.685,-
33.995,-
Appliqués the Easy Way
Ironing instead of sewing: it’s as easy as that.The BSN thermo film permanently bonds embroideries, patches and emblems –
without sewing! BSN is ironed on the back of a completed embroidery design,
making every appliqué extremely durable. And embroidery edges and borders don’t
peel off.
BSN is available in two different versions: for delicates, washable
up to 40° C and for industrial garments, washable up to 95° C – in any case, an
incredibly time-saving, convenient and most effective solution!
Main Applications
Heat-seal film for appliqués, patches and
emblems.
For permanent bonding of edges, borders and seams.
emblems.
For permanent bonding of edges, borders and seams.
Processing Recommendations
Coating of the embroidery
design:
Place the embroidery design face up on the BSN foil side and
cut out the design’s shape.
Type I: apply with a heat press, approx. 5
sec. at a temperature of 170° C.
Type H: apply with a household iron, approx.
5 sec. at a temperature of 135° C.
Remove the protective paper sheet from
the coated design.
Appliqués on garments:
Place the
coated embroidery design on the desired area of the garment and press it on
permanently:
Type I: apply with a heat press (pressure: approx. 1.4 bar),
approx. 15 sec. at a temperature of 170° C.
Type H: apply with a household
iron (putting pressure on the iron’s tip), approx. 20-25 sec. at a temperature
of 135° C.
Full adhesiveness of BSN will be achieved after 48
hours!
Tip:
Iron the base fabric prior to
the BSN application. Fabric finishes will vaporise and you’ll achieve an amazing
permanent bonding!
design:
Place the embroidery design face up on the BSN foil side and
cut out the design’s shape.
Type I: apply with a heat press, approx. 5
sec. at a temperature of 170° C.
Type H: apply with a household iron, approx.
5 sec. at a temperature of 135° C.
Remove the protective paper sheet from
the coated design.
Appliqués on garments:
Place the
coated embroidery design on the desired area of the garment and press it on
permanently:
Type I: apply with a heat press (pressure: approx. 1.4 bar),
approx. 15 sec. at a temperature of 170° C.
Type H: apply with a household
iron (putting pressure on the iron’s tip), approx. 20-25 sec. at a temperature
of 135° C.
Full adhesiveness of BSN will be achieved after 48
hours!
Tip:
Iron the base fabric prior to
the BSN application. Fabric finishes will vaporise and you’ll achieve an amazing
permanent bonding!
Downloads:
 |
Embroidery without non-woven |
Technical Information
Material:
100%
copolyamid
Available in 2 different
versions:
Type I
- suitable for industrial
garments, washable up to 95° C
- can only be applied with a heat press
-
strength: 73 μ, 80 g/m2
Type H
- suitable for delicates,
washable up to 40° C
- application also possible with a household iron
-
strength: 55 μ, 60 g/m2
Make-up - Types I + H:
Rolls
in 4 different sizes: 105.0 cm x 100 m, 52.5 cm x 100 m, 35.0 cm x 100 m, 35.0
cm x 25 m
Dispatch and packing size:
Single rolls
100%
copolyamid
Available in 2 different
versions:
Type I
- suitable for industrial
garments, washable up to 95° C
- can only be applied with a heat press
-
strength: 73 μ, 80 g/m2
Type H
- suitable for delicates,
washable up to 40° C
- application also possible with a household iron
-
strength: 55 μ, 60 g/m2
Make-up - Types I + H:
Rolls
in 4 different sizes: 105.0 cm x 100 m, 52.5 cm x 100 m, 35.0 cm x 100 m, 35.0
cm x 25 m
Dispatch and packing size:
Single rolls
Kommentarer