Tilbud
Bestselgere
Klarna
Utvalgte produkter
FILMOPLAST selvklebende STIC 140 SORT 25 meter x 54cm
FILMOPLAST STIC - Self-Adhesive Embroidery Nonwoven
The Multifunctional Embroidery Nonwoven!
FILMOPLAST®STIC is the epitome of stabilizer versatility: only the nonwoven is hooped in the frame, the fabrics to be embroidered are simply placed on top. This prevents frame marks on delicate fabrics. As adhesive version it stabilises woven and knit materials while improving stitch images. And extremely small pieces not suitable for hooping can be embellished just as conveniently with this versatile adhesive film. Even caps are quickly customised without using a special cap frame – simply stick them on FILMOPLAST®STIC and off you go!FILMOPLAST®STIC is economical. Holes left in the hooped film after embroidery completion are simply covered with remnant pieces. Eliminating repeated hooping of the frames, setting-up and stoppage times will be minimised which truly saves time during production processes. All in all: it’s an investment that optimises your profits!
Main Applications Processing Recommendations Technical Information Advantages Downloads:
 |
Productflyer |
|
Safety Data Sheet |
Main Applications
For non-heat bonding of light to heavy-weight fabrics.
For stabilising stretch fabrics, like T-shirts, polo shirts, materials containing elastane, etc.
For needle-sharp pattern outlines and letters, even on stretch materials.
For stabilising delicate fabrics where frame marks are unwanted, e.g. velvet, fleece, or dark fabric types.
For embroidery placements that are difficult to hoop, like trouser and shirt pockets, collars, cuffs, ribbons, etc.
For stabilising stretch fabrics, like T-shirts, polo shirts, materials containing elastane, etc.
For needle-sharp pattern outlines and letters, even on stretch materials.
For stabilising delicate fabrics where frame marks are unwanted, e.g. velvet, fleece, or dark fabric types.
For embroidery placements that are difficult to hoop, like trouser and shirt pockets, collars, cuffs, ribbons, etc.
Processing Recommendations
1. Hoop FILMOPLAST®STIC with the protective paper facing up.To facilitate the positioning of the work piece, mark the respective areas: let the embroidery needle penetrate FILMOPLAST®STIC at four different points. Connect the four points using a ruler and pen to create a crosshair.
2. Using scissors or a needle, slightly slit open the protective paper and peel off the paper so the adhesive side is uncovered. The crosshair marking on the protective paper presses through onto the nonwoven. If necessary, redraw it on the nonwoven to make it more visible.
3. Place the fabric on the nonwoven’s adhesive side. Select fixed points on the fabric to determine the right position at the crosshair, e.g.- for polo shirt embroideries: the button facing
- for shirt collar embroideries: the collar edge
Place the fabric on top, position it and firmly press it down. Embroider the design.
4. Carefully peel off the embroidered fabric from the adhesive film. The hoop remains in the machine. Tip: To facilitate the removal of the work piece from the hoop, the hoop can be moved forward.
5. Cover the hole left in the nonwoven with a matching remnant piece of FILMOPLAST®STIC. Tip: The remnant piece should be slightly larger than the hole to be covered. Make sure to attach the remnant piece from the top so it will not stick to the stich plate during the following embroidery process. Peel off the protective paper only after the remnant piece has firmly been attached to the hole to be covered.6. Place the next fabric piece to be embroidered on the reference points, position the hoop at the starting point and embroider the design.
7. Embroidery processes can be repeated this way various times after hooping FILMOPLAST®STIC only once.
Technical Information
Storage:
For acclimatization purposes FILMOPLAST®STIC should be kept in the same room where it’s being processed for at least 3 hours prior to its application.
FILMOPLAST®STIC 120:
For light to medium-weight fabrics and for fixation of small fabric pieces.
Material:
One-sided adhesive special nonwoven 82% viscose, 18% polyester
Glue: waterborne polyacrylate dispersion, solvent-free, ageing-resistant and permanently elastic
Release paper: bleached siliconised kraft paper
Strength: 125 µ, 28 g/m2
Colours:
black and white
Make-up:
Rolls in 3 different sizes: 54 cm x 25 m, 84 cm x 25 m, 124 cm x 25 m
Dispatch and packing size:
Single rolls
FILMOPLAST®STIC 140:
For fixation of medium to heavy-weight fabrics, particularly for patterns with a high stitch count.
Material:
One-sided adhesive special nonwoven 100% viscose
Glue: waterborne polyacrylate dispersion, solvent-free, ageing-resistant and permanently elastic
Release paper: bleached siliconised kraft paper
Strength: 225 µ, 40 g/m2
Available colour:
white
Make-up:
Rolls in 3 different sizes: 54 cm x 25 m, 84 cm x 25 m, 124 cm x 25 m
Dispatch and packing size:
Single rolls
For acclimatization purposes FILMOPLAST®STIC should be kept in the same room where it’s being processed for at least 3 hours prior to its application.
FILMOPLAST®STIC 120:
For light to medium-weight fabrics and for fixation of small fabric pieces.
Material:
One-sided adhesive special nonwoven 82% viscose, 18% polyester
Glue: waterborne polyacrylate dispersion, solvent-free, ageing-resistant and permanently elastic
Release paper: bleached siliconised kraft paper
Strength: 125 µ, 28 g/m2
Colours:
black and white
Make-up:
Rolls in 3 different sizes: 54 cm x 25 m, 84 cm x 25 m, 124 cm x 25 m
Dispatch and packing size:
Single rolls
FILMOPLAST®STIC 140:
For fixation of medium to heavy-weight fabrics, particularly for patterns with a high stitch count.
Material:
One-sided adhesive special nonwoven 100% viscose
Glue: waterborne polyacrylate dispersion, solvent-free, ageing-resistant and permanently elastic
Release paper: bleached siliconised kraft paper
Strength: 225 µ, 40 g/m2
Available colour:
white
Make-up:
Rolls in 3 different sizes: 54 cm x 25 m, 84 cm x 25 m, 124 cm x 25 m
Dispatch and packing size:
Single rolls
Kommentarer